Windtech CM21
Video Hot Shoe Mic Clip
The Windtech CM21 "hot shoe" shotgun clip fits most standard video camera hot shoe mounts. A locking nut holds mic clip in place. Adjustable microphone angle with adjustment screw. Fits mics with shaft diameter of 21 mm.The CM21 fits the following shotgun mics: AKG C568, CK61, CK62, CK63, CK68…
Call for availabilityAudio Technica AT8417
Tie Clip, Wire For AT831 And AT803
The Audio Technica AT8417 is the replacement tie & lapel clip for the AT831 and AT803 lapel microphones. It attaches to the mic via a firm wire loop. This clip is a more secure attachment for prolonged or active usage.
Call for availabilityAudio Technica AT8411
Tie Clips for AT831 And AT803
The Audio Technica AT8411 is the replacement clothing clip for the AT831 and AT803 lapel microphones. It attaches to the mic via plastic semicircle clip. This clip is designed for quick attachment and release.
In StockCountryman ECLT
Two-Ear Clip for E6 / E6i Earsets (Tan) Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilitySennheiser ASA-214-UHF
Active antenna splitter with DC power distribution for ew G3 and ew G4 receivers
The ASA 214 active antenna splitter is built in a full metal housing and ships with 8 BNC cables included. The splitter runs up to 4 receivers of the ew series with one antenna. The UHF-Version includes the NT 1-1 power supply with EU, UK and US adapters, while the ASA 214-1G8 includes the NT 1-1…
Call For AvailabilityCountryman ECLB
Two-Ear Clip for E6 / E6i Earsets (Black)Mic on Left Side
The ideal complement to the Countryman E6 and E6i EarSet microphones, the EarClip provides comfortable, adjustable, extremely low profile two-ear support. It tolerates sweat, weather, and makeup, while virtually disappearing on stage. Much lighter than other headsets, it fits easily and holds…
Call for availabilityDPA DAD6033
Adaptor: DPA MicroDot to Audio-Technica Series 2000, 3000, 4000, 5000.
This adapter for the DPA 4065, 4066, 4067 and 4068 series fits Audio-Technica Series 2000, 3000, 4000, 5000. (MicroDot to 3-pin Lemo)
Call for availabilityHeil Sound RC22
PR22 Wireless Capsule
Upgrade your wireless handheld microphone. Replace your mic element with the rich, warm Heil sound! The new RC22 contains the dynamic element of the Heil PR22 producing much better articulation with high rejection from the sides and rear. The Heil replacement capsules (RC22 or RC35) are…
Call for availabilitySennheiser XSW-D PORTABLE ENG Set
XS Digital Wireless System - PORTABLE ENG Set
What's Included: • XSW-D 3.5mm (1/8”) transmitter • XSW-D XLR Female transmitter • XSW-D 3.5mm (1/8”) receiver • ME2-II clip-on lavalier mic • 3.5mm (1/8") coiled cable • Cold shoe mount • Belt clip • USB-A to USB-C charging cable One-touch ease-of-use wireless audio set that utilizes a digital…
Call For AvailabilityArrakis MLC-009
80‘s Pop Xtreme Music Library
Arrakis Master Library Collection of 80's Pop (approximately 1,118 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few years…
Call for availabilityArrakis MLC-006
70’s Rock Xtreme Music Library
Arrakis Master Library Collection of 70's Rock (approximately 915 songs) on DVD-R disc for Arrakis automation products. Ripping, processing, compressing, and setting data on music is time consuming and expensive. And because today's rippers and compressors are so much better than just a few years…
Call for availabilityRDL ST-PH1
Stereo Phono Preamp
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…
Call for availabilityRycote 037306
Medium Hole Camera Clamp Adapter Mount For Softie
This medium hole (21-22mm) mount features a Camera Clamp Adapter (CCA) thatoffers an effective solution not only to boom pole mounting, but also allows a Softie mount to be attached to a variety of cameras and camcorders via the microphone clamp.
Call for availabilityART USBPHONOPLUSPS
Phono - Line Preamp w/USB
The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…
Call For AvailabilityElectrovoice 320
Stand Clamp For RE20 / RE27ND
Stand clamp for the Electro-Voice RE20, RE27N/D, and N/D 868, black.
In StockStanton SMX202
2-CH 10" Compact DJ Mixer (120V)
The SMX.202 features a simple design that makes it easy to get up and running quick, whether mixing vinyl or CD.Main Features:• Sturdy All Metal Construction for Extreme Use • 2 Line and 2 Phono Inputs • 2 Band EQ and Gain Control per Channel • Cue Section Features Cue Level and Cue Pan • Mic Input…
Call For AvailabilityElectrovoice SAPL-3
Microphone Stand Adaptor For PL37
Fits the Electrovoice PL37 mic like a proverbial charm.
Call for availabilityNeumann SGE100
Swivel Mount For AK Capsules
Swivel mount for active capsules of the KM100 system. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M6 thread (6mm).
Call for availabilityDPA DAD6034
Adaptor: DPA MicroDot to Sennheiser Evolution Series
This adapter for the DPA 4065, 4066, 4067 and 4068 series fits Sennheiser Evolution wireless systems. (MicroDot to Mini-Jack (with thread))
Call for availabilityRode SB20 Stereo Bar
20cm stereo array spacing bar
The RØDE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RØDE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8”…
Call For AvailabilityART DEEJAYPRE2
Phono - Line Preamp (DJPre-2)
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable…
In StockSennheiser SL-BA-10
Rechargable Battery for SL Handheld
Rechargeable battery pack for evolution wireless D1 SKM handheld transmitters.Specifications: • Output voltage 3.6 V • Capacity 2200 mAh
Call For AvailabilityDPA DAD3056
Adaptor: DPA MicroDot to Lectrosonics SM, LM & UM (for low DC Microphones)
This adapter for the DPA 4067 fits the Lectrosonics wireless LM, SM and UM series. (MicroDot for TA-5F Switchcraft)
Call for availabilityPoint Source Audio R-DMC-BE
Reversible Dual Earset Clip
Reversible dual-ear clip adapter for use with PointSource microphones.
Call for availabilityNeumann SG100
Swivel Clamp For KVF Goosenecks To Stand
Swivel mount to attach capsule extensions KVF ... of the variable KM100 miniature microphone system to tripods. It has a 5/8"-27 thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Call for availability