Products, Wattmeters, Cable - RF and Accessories, Jampro, ERI, Preamps, Computer Audio, RF Equipment, Turntables, Broadcast

ERI ACX150-10SE
*Elbow, 1 5/8" 90 Degree, Flanged

1-5/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

ERI STD150-21
*1-5/8" 50 ohm 20' Line Section

1-5/8-inch, 50 ohm, 20-foot standard line section, unflanged.

ERI RLA300-11-H
*3-1/8 Vertical Spring Hanger

3-1/8 hinged vertical spring hanger, supports the transmission line, prevents lateral motion, and accommodates differential expansion and contraction. Use at 10 foot intervals. Hinged to open from left or right side to save installation labor. Includes 1/2-inch mounting hardware.

ERI RLA100-11-H
*1-5/8" Vertical Spring Hanger

1-5/8-inch vertical spring hanger, accommodates line expansion and contraction. Use at 50 foot intervals. Mounts to 9/16-inch diameter hole with included 1/2-inch diameter bolt or to angle adapters

ERI ACX050-10SE
90 Degree Elbow Flanged 7/8"

7/8-inch, 50 ohm, 90 degree miter elbow, swivel flanges, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Formerly Part Number: 1060A.

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

ERI STD350-1
3-1/8" Rigid Line, Flanged Both Ends, 20 ft.

ERI has long been the industry leader in Radio Broadcast Systems. Electronics Research offers a complete line of products and services to fulfill your Radio Braodcast Systems needs. From Radio Filters and Combiners to AM and FM Antenna Systems, Electronics Research, Inc. can meet your requirements…

ERI ACX350-20
*Inner Connector, 3 1/8" Bullet

3-1/8-inch, 50 ohm standard inner connector.

ERI STD350-31
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.

ERI ACX350-10SE
*Elbow, 3 1/8" 90 Degree, Flanged

Type Number: ACX350-10SE 3-1/8-inch, 50 ohm, 90 degree miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit. Not reinforced.

ERI STD350-52
*3-1/8" 50 ohm Male-to-Male Adapter

3-1/8-inch, 50 ohm, male-to-male adapter, no inner connectors, includes hardware kit, 6-inch length. Formerly Part Number: 23187

ERI RLA000-21
*7/8-inch Hardware Kit

7/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly part number 66748-6.

ERI STD050-52
*7/8" 50 ohm Male-to-Male Adapter

7/8-inch, 50 ohm, male-to-male adapter, no inner connectors, includes flange hardware kit, 6-inch length. Formerly Part Number: 243972.

ERI STD150-52
*1 5/8" Male To Male Adapter, 6" Length

The ERI STD150-52 is a 1-5/8-inch, 50 ohm, male-to-male adapter with no inner connectors. Six inches long, it includes a flange hardware kit.