DBX 231S
Dual Graphic Equalizer
The dbx 231s dual 31-Band Graphic EQ can handle the most demanding sound reinforcement environments, while offering exceptional ease-of-use.It boasts dual 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an…
Call for availabilityBetter Bands BB4 4-Pack
4 Pack - Suspension bands for EV 309A shockmount
Better Bands have improved upon the decades-old design of the rubber shock mounts on the ElectroVoice 309A mount for the RE20. Stronger, better designed bands means less replacement and savings for you (and your station).Main Features:• Better Design: Better Bands are created with more than twice…
In StockEventide R2016
Stereo Reverb Processor
Eventide's Reverb 2016 is a dedicated reverb with easy "one knob/one job" controls that recreates the legendary reverb algorithms of their SP2016 – Stereo Room, Room Reverb and High Density Plate. Every aspect of the original effects has been duplicated including every detail of the user…
Call for availabilityEventide ECLIPSE
Dual Engine Multi-Effects Processor
The Eclipse harmonizer effects processor offers the power, performance and heritage of Eventide audio effects in a single rack space unit. It's packed with amazing features: a full complement of Eventide's signature pitch change, reverb, and special effects program presets, all with uncompromising…
Call for availabilityRolls HRD342
Digital room/speaker Delay
The Rolls HRD342 is intended for low cost, simple, time alignment of speakers in larger rooms or outdoors. The delay dial is shown in mili seconds to make setup easy. The 32 to 360 ms shown on the dial will correlate to about the same in feet (32 ms = 32 ft). The Rolls HRD342 is inserted between…
Call For AvailabilityART 355ART
Dual 31 Band Equalizer (EQ355)
Dual channel 31-band EQ in a dual rack space. Features: dual range switch (+/-6dB or +/-12dB cut/boost); bypass switch; high-pass and low-pass controls (on 351/355 only); balanced XLR, 1/4 and unbalanced RCA I/O; 120/240 volt switch; rear panel ground lift switch; LED clip indicators.
Call for availabilityART PROVLAII
Professional Two Channel Compressor
The Pro-VLA II is a two-channel, tube driven Vactrol-based Compressor / Leveling amplifier that excels in any professional audio application, including tracking, mixing, mastering, live sound or broadcast situations.Its opto-electronic design, (as opposed to a more typical VCA driven level…
Call for availabilityUniversal Audio 4-710D
Four-Channel Tube/Solid State Tone-Blending Preamp/DI w/Dynamics & A/D
Classic tube and solid-state tones with 1176-style compression and professional A/D conversion By merging the best of UA’s classic analog design with smart modern features and workflow enhancements, the 4-710d is the most flexible microphone preamp in the UA lineup. Featuring four high-end mic/line…
Call For AvailabilityCloud Microphones Cloudlifter CL-2
Dual Channel phantom powered mic activator/pre +25db gain for low output mics
A Must-have Tool for Any Rig! Fire up your low-gain mics and long cable runs, with a Cloudlifter CL-2 Mic Activator from Cloud Microphones!Low-gain microphones typically come with high-impact problems that can frustrate engineers. Unfortunately, many low-output microphones, such as the SM7b, the…
In StockNicom NT2000
2000W FM Exciter Transmitter, LCD Display 2RU 7/16 DIN Connector (NT2000)
Phase Locked Loop Programmable FM Exciter/Transmitter 87.5 - 108 MHz RangeMain Features:• Includes low pass/harmonic filter and can be used as a stand-alone transmitter • Instant front panel programmability in 10 kHz increments • All functions via LCD password protected • Adjustable power output…
Call For AvailabilityEventide H7600
Effects Processor with Nearly 1100 Presets
If you're serious about sound, invest in this blue chip processor and reap the digital dividends. The H7600 is quite simply the most powerful two-channel effects processor on the market. Brimming with 24-bit/96kHz processing power, it features an unprecedented number of preset algorithms including…
Call for availabilityBext FR500
500W Broadband Solid State FM Amplifier
500W Broadband Solid State FM AmplifierMain Features:• 500W amplifier in highly efficient, lightweight, compact size cabinet• Fast access to all functions & parameters via user-friendly menus display w/ pushbuttons • Automatic gain control providing fixed output power even in…
Call for availabilityRolls MB15B
2-Way Stereo Converter
The Rolls MB15b ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and vice versa. One side of the unit has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED…
Call for availabilityCloudlifter CL1 Broadcast Cable Bundle
Single Channel phantom powered mic activator with BSW-BMC-20 cable
If you needaCloudlifter to boostyour broadcast mic's output, get it bundled with a custom broadcast mic cable! Get a Cloudlifter CL-1 Mic Activator and a BSW-designed, 20-footBSW-BMC-20 mic cable for one special price!A Must-Have Tool for Dynamics and Ribbons! Cloudlifter CL-1 Mic Activator is an…
Available from StockLexicon PCM96
Stereo Reverb/Effects Processor
The Lexicon PCM96 Stereo Reverb/Effects Processor for Mac delivers 28 new and legendary Lexicon reverbs, delays and modulation effects straight into your DAW. With two channels XLR analog and two channels XLR AES/EBU digital I/O, as well as MIDI, Wordclock, Ethernet and FireWire connectivity, the…
Call for availabilityRDL HR-MCP2
Dual Channel Mic Compressor
The Radio Design Labs HR-MCP2 dual-channel microphone compressor offers full studio-quality low-noise performance at any gain setting while delivering a consistent audio output level over wide variations (up to 25 dB) in the microphone input level. Rear-panel switches let you set each output to mic…
Call for availabilityKlark Teknik EQP-KT
Classic Tube Equaliser with Switchable Frequency Selection, Variable Bandwidth and Custom-Built MIDA
If ever there is an official “Audio Technology Hall of Fame”, it will definitely include a shrine to the legendary Pultec EQP-1A. We pay homage to this audio-processing pioneer that has graced so many recordings, with our EQP-KT Classic Tube Equaliser. And while vintage Pultec units are extremely…
Call For AvailabilityNeumann EA2124A
Shockmount For KM 80, KM 100, KM 180 Series
This shockmount works with microphones from 21 to 24mm in diameter. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Call for availabilityQEI QUANTUMM3.6
* 3.6 KW FM Transmitter w/ 20M Exciter
Designed for years of trouble free service, the totally solid state QEI Quantum Series FM transmitters provide an unsurpassed broadcast signal. The Quantum Series of 1.2 to 9.6 kilowatt transmitters offer the FM broadcaster the benefits of QEI's unequaled background in FM solid state performance…
Call for availabilityNicom NT500
500W FM Exciter Transmitter, LCD Display 2RU N Connector (NT500)
Phase Locked Loop Programmable FM Exciter/Transmitter 87.5 - 108 MHz RangeMain Features• Includes low pass/harmonic filter and can be used as a stand-alone transmitter• Instant front panel programmability in 10 kHz increments • All functions via LCD password protected • Adjustable power output from…
Call For AvailabilityBelar FMMA1
*The Wizard FM Modulation Monitor /Analyzer
The Wizard is a microprocessor controlled, digital baseband FM modulation monitor/analyzer that precisely measures peak modulation, peaks per minute, average peak modulation, modulation density, and more. The Wizard can operate with an existing modulation monitor, or it can be configured to replace…
Call for availabilityNicom NT30H
50 WATT FM Transmitter
Phase Locked Loop Programmable FM Exciter/Transmitter 87.5 - 108 MHz RangeMain Features:• Includes low pass/harmonic filter and can be used as a stand-alone transmitter • Instant front panel programmability in 10 kHz increments • All functions via LCD password protected • Adjustable power output…
Call For AvailabilityRode SM5
Shock Mount for NTG1, NTG2 (Clamp Mt)
Suspension shockmount (clamp adaptor). The SM5 is a shockmount for high-end video cameras. The SM5 shockmount is designed specifically to fit Panasonic and Sony video cameras with clamp mounts. It features a 4-way rubber suspension with integral 24 mm and 27 mm clampmount adaptor. The SM5…
Call for availabilityAmerican Amplifier Tech AAT-UHF-4000
4000 Watt Digital UHF TV Transmitter
AAT Digital UHF Transmitters are designed using reliable modular systems that offer flexible configurations. All UHF systems incorporate a user friendly touchscreen display. Remote monitoring is provided via Ethernet, SNMP, and Remote Samples. All units can easily be paired with any of our…
Call For AvailabilityNeve 4081
Quad Mic Preamp
The Neve 4081 Quad Mic Preamp builds on the incredible success of the 1081 and 1081R modules and provides both powerful control and legendary Neve sound. Perfect for vocals, ADR and Foley recording, the 4081's features make it the number one choice for any post-production, studio, OB truck or live…
Call for availability