Products, Shock Mounts, Modulation Monitors, Matching Amplifiers, Microphone Preamps, Preamps, RF Equipment, Signal Processing, Interfaces and Routers, Microphone Accessories, Transmitters and Exciters, Turntables, Broadcast

Cloud Microphones Cloudlifter CL-Z
Single Channel phantom powered mic activator/pre, variable impedance, high pass filter & gain pad

Maximize Your Mic Signal for Stage or Studio! Optimize any dynamic or ribbon microphone in your locker with the Cloud Microphones CL-Z mic activator! The Cloud Microphones CL-Z mic activator uses phantom power from your preamp to solve an array of common issues with dynamic and ribbon microphones…

Rycote 044903
InVision USM-L (Lite) - Universal Large Diaphragm Microphone Isolation Mount

The Rycote InVision Universal Studio Mount Light provides a discreet, low profile way to mount practically any lighter weight microphone with a diameter of 18-55mm. The mount uses Rycote's patented Lyre suspension system, which does not use any runner or elastic components to isolate the mic.…

Nicom NT30 Package
NT30 FM Transmitter with BKG1P Antenna and 50ft RG213 cable Package

Nicom NT30 FM TransmitterThe Nicom Phase Locked Loop Programmable FM Exciter/Transmitter.*Transmitter comes from the factory in a mono configuration. Ask your BSW rep for more information on the stereo configuration.Main Features:• Includes low pass/harmonic filter and can be used as a stand-alone…

Yamaha SPX2000
Digital Multi-Effects Processor (North America: AC120V, 60Hz, 25W)

The powerful new Yamaha SPX2000 stereo multi-effects processor features Yamaha's new advanced "REV-X" reverb algorithm, generous effects and reverbs to choose from, and a 32-bit, 96 kHz DSP. The SPX2000 is packed with effects in three banks: the PRESET bank includes 97 programs, including the new…

Rane AD22S
Audio Delay (1U) 2 999 mS - Display In Milliseconds, Feet, Meters, or Frames

The Rane AD22S is a fully balanced two-input, two-output Audio Delay unit designed for multiple applications, including speaker array synchronization and precision audio-to-video alignment. With two distinct modes, the AD22S offers the functionality of dedicated devices within a single rack unit.…

Armstrong FM5000B
FM Transmitter 5KW -- (2X) FM2500B + FMX150B

Armstrong Solid State FM transmitters utilize a building block approach to achieve the required transmitter output power. Multiples of either their 650 Watt, 1.3 kW or 2.5 kW self-contained Solid State Amplifier are rack mounted with an appropriately sized driver and externally combined. This model…

Neumann EA87MT
Shockmount For U87/U87AI (Black)

The EA87 mt is designed for the U87Ai microphone. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" studs. Black finish.

Henry Engineering TwinMatch
Interface Amplifier

TwinMatch is a dual-stereo (4-channel) level and impedance converter that interfaces two unbalanced consumer stereo outputs with professional balanced equipment. TwinMatch is ideal for use with a pair of stereo CD players or other "play only" sources. The unit accepts four channels (2 stereo pairs)…

RDL ST-UBA2
Interface Amplifier, Unbalanced to Balanced

The Radio Design Labs STU-BA2 two-channel interface amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of…

RDL ST-PH1
Stereo Phono Preamp

The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 kΩ impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads.…

Chandler PSU1
Power Supply

Outboard Power Supply required for Chandler audio processors.

DEVA Broadcast DB4005
SDR-Based FM Radio Modulation Analyzer and Monitoring Receiver

DB4005 is DEVA Broadcast's third-generation digital FM Radio modulation analyzer and receiver, the result of long years of experience and a desire to always provide intelligent near-perfect solutions, while keeping pace with the very latest technological developments and trends.With this product,…

ART USBPHONOPLUSPS
Phono - Line Preamp w/USB

The USB Phono Plus is the ideal solution for transferring any highly prized vinyl collection to your computer or laptop. It is also the ideal high performance audio interface between analog and digital sources. Built in low-noise RIAA phono pre-amp circuit with low cut filters (to remove rumble and…

DEVA Broadcast Radio Explorer
Mobile FM Radio Analyzer

The Radio Explorer is an excellent tool for onsite setup and analysis of broadcasting equipment. This unit can measure all the important parameters of the FM transmissions and displays them on the large LCD display. For even better control, the device can be connected to any Windows PC via a front…

Tascam SERIES-8P-DYNA
8 CH Microphone Preamp with Compressor

With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or…

PTEK PS3
3000W Transmitter 4U - Flange Connector

The PS Series is available in 2,000–5,000 watt versions. These transmitters are 80% efficient and are quick and easy to install.The PS Series achieves 80% efficiency with LDMOS based amplifiers. This results in a low cost of ownership. There is also additional cost savings resulting from the lower…

Nicom NT250
250W FM Exciter Transmitter, LCD Display 2RU N Connector (NT250)

Phase Locked Loop Programmable FM Exciter/Transmitter 87.5 - 108 MHz RangeMain Features:• Includes low pass/harmonic filter and can be used as a stand-alone transmitter • Instant front panel programmability in 10 kHz increments • All functions via LCD password protected • Adjustable power output…

DEVA Broadcast BS-2 Band Scanner 2
Band Scanner 2

The Band Scanner 2 is a revolutionary device that builds on the features of the legendary Band Scanner to provide you with the ultimate tool to assess FM broadcast band congestion and log station identification parameters. In keeping with the characteristics of its famous predecessor, this…

Symetrix JUPITER8
Audio Processor - 8 Inputs

Symetrix Jupiter packages powerful DSP into a zero learning curve, turn-key audio processing solution drawing its inspiration from the “apps” paradigm of smartphones. Standing on the shoulders of Symetrix' world-class SymNet DSP platform, Jupiter upholds the Symetrix commitment to pristine sound.…

Presonus Studio Channel
Tube Channel Strip with Mic Preamp, Compressor and EQ

The PreSonus Studio Channel is a professional channel strip combining a Class A tube preamplifier, VCA-based compressor and three-band parametric equalizer to deliver exceptional sonic power and flexibility. The preamplifier stage of the PreSonus Studio Channel features a high output 12AX7 vacuum…

DBX 231S
Dual Graphic Equalizer

The dbx 231s dual 31-Band Graphic EQ can handle the most demanding sound reinforcement environments, while offering exceptional ease-of-use.It boasts dual 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an…

Better Bands BB4 4-Pack
4 Pack - Suspension bands for EV 309A shockmount

Better Bands have improved upon the decades-old design of the rubber shock mounts on the ElectroVoice 309A mount for the RE20. Stronger, better designed bands means less replacement and savings for you (and your station).Main Features:• Better Design: Better Bands are created with more than twice…

Eventide R2016
Stereo Reverb Processor

Eventide's Reverb 2016 is a dedicated reverb with easy "one knob/one job" controls that recreates the legendary reverb algorithms of their SP2016 – Stereo Room, Room Reverb and High Density Plate. Every aspect of the original effects has been duplicated including every detail of the user…

PTEK FM500ES
FM Transmitter w/Exciter Up To 550W with Built-In Stereo Encoder

Designed and manufactured in the USA, PTEK solid-state FM exciters/transmitters cover 20 to 1000 watt power ranges and offer full remote control ability. All models boast frequency stability better than +200Hz (using PLL frequency synthesis from a high stability crystal oscillator). They also…

Eventide ECLIPSE
Dual Engine Multi-Effects Processor

The Eclipse harmonizer effects processor offers the power, performance and heritage of Eventide audio effects in a single rack space unit. It's packed with amazing features: a full complement of Eventide's signature pitch change, reverb, and special effects program presets, all with uncompromising…