ART HEADTAP
Headphone Tap
In many live environments, floor monitors can't be heard. A musician might be better off using headphones. However, more personalized audio control is required. The ART HeadTap provides quick and convenient tapping facilities to permit powering headphones directly from an amplifier. It's a passive…
Call for availabilityRolls RA163
XLR Distribution Amp 8 CH Mono/4 CH Stero
The Rolls RA163 is an eight channel mono, or four channel stereo distribution amplifier designed for the contractor / install market. The outputs are designed to drive high-level balanced lines in a sound distribution system. The XLR jacks on the rear panel are for input and output, and each output…
In StockHenry Engineering MultiPhones-II
Multi-User Headphone Distribution System
The MultiPhones II system, consisting of a Master unit and up to 12 satellite Guest Pods interconnected with standard CAT5 cabling, offers independent stereo headphone listening facilities with Zoned Talkback for up to 12 users. Its Master unit distributes Program audio to all Guest Pods via three…
Call for availabilityHenry Engineering StereoSwitch-II
Stereo Switcher
StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for numerous broadcast applications, e.g., as a studio switcher, line selector, or for automatic source…
Call for availabilityDM Engineering MICPRO2
Microphone On/Off Switching Module & 6 Ft Cable
This state-of-the-art, stand-alone microphone switching control makes low cost production mixing boards perform like expensive broadcast consoles.As many microphone channels as your production board has "Insert" jacks for can now be individually controlled by its own Mic-Pro 2. It is also ideal for…
Call for availabilityBroadcast Tools HPA-2 Plus
Dual Input Headphone Amplifier, Drives Up To 2 Sets Of Headphones
The Broadcast Tools HPA-2 Plus is a compact high-power stereo headphone amplifier that lets you monitor between two independent stereo input sources, at a inexpensive price. The HPA-2 Plus may be desktop mounted, or under counter. Main Features:• High-power stereo amplifier • Front panel input…
Call For AvailabilityBroadcast Tools 2x16DA-RJ
Distribution Amplifier with RJ45
The Broadcast Tools 2x16 DA/RJ analog stereo distribution amplifier is equipped with a line level high-Z input, which accept either a balanced RJ45 (+4 dBu) source or an unbalanced RCA (-10 dBV) source and features 16 active balanced low-Z output amplifiers. The output amplifiers make up eight…
Call For AvailabilityCloud Microphones Cloudlifter CL-1
Single Channel phantom powered mic activator/pre +25db gain for low output mics
A Must-Have Tool for Dynamics and Ribbons! Cloudlifter CL-1 Mic Activator is an easy to use, compact solution for common audio problems faced in the field and in the studio. Designed for all passive microphones – including ribbons- the CL-1 safely uses any standard phantom powered microphone input…
Call For AvailabilityDM Engineering RELAYPACK
Solid State Switcher
The Studio Solid State RELAYPACK is a switching interface for controlling 115VAC “ON AIR” or “RECORDING” lamps using N. O. contacts or a logic low, and/or low voltage DC control. It is designed to interface with the DM Engineering STUDIOSLAVE, but will perform with any N.O. contact closure or DC…
Call for availabilityBroadcast Tools UNIVERSAL 4.1-MLR-WEB
4ch passive switcher/router with AES/Analog stereo XLR and StudioHub I/O
The Universal 4.1 MLR/Web is a web based transparent four input, one output switcher/router with mechanical latching relays designed to pass AES or stereo balanced signals. The unit may be configured to monitor for stereo analog audio silence or loss of AES clock when configured for AES switching.…
Call For AvailabilityHenry Engineering BACKUPS
UPS Power Controller
BackUPS is a power controller for ensuring reliable AC power to critical equipment that is powered with an Uninterruptible Power Supply (UPS). BackUPS constantly monitors the output of the UPS, and automatically bypasses the UPS if its output fails or becomes unstable. BackUPS has two AC inputs:…
Call For AvailabilityArmstrong X1000B
**AM Transmitter 1000 Watts
This compact, 1KW Solid State AM Transmitter is HD Radio ready and offers high quality audio, low maintenance and optimized multiphase modulation.Housed in a heavy-duty aluminum chassis, it easily fits into a 19" rack, taking up only seven rack spaces (12.25"). It features hot pluggable 600-watt…
Call For AvailabilityGalaxy Audio JIBR
RCA Combiner
Galaxy's Jack-in-the-Box R (model #JIBR) is an RCA combiner. It sums two stereo CD or tape players into one mono (XLR or 1/4") output. This allows two stereo sources to be run though a single mono mixer channel, freeing channels for other uses. Phantom block circuitry prevents interference from two…
Call for availabilityPTEK FM500ES
FM Transmitter w/Exciter Up To 550W with Built-In Stereo Encoder
Designed and manufactured in the USA, PTEK solid-state FM exciters/transmitters cover 20 to 1000 watt power ranges and offer full remote control ability. All models boast frequency stability better than +200Hz (using PLL frequency synthesis from a high stability crystal oscillator). They also…
Call for availabilityMackie HM-800
8-Channel Headphone Amplifier
The 19” rackmount HM-800 8-Channel Headphone Amplifier offers up to 10 available mixes with a total of 16 headphone outputs. Perfect for professional applications including studios, Houses of Worship, practice spaces, and more. Featuring 2 discrete main inputs with level control plus stereo outs,…
Call For AvailabilityRolls RA62C
6-Channel Headphone Amplifier
The Rolls RA62C headphone/earphone amplifier features 6 stereo channels (both 1/4" and 3.5 mm) with independent output controls that can be used simultaneously. It can put out a vigorous 600 mW per jack. It boasts XLR, 1/4", and RCA Main Inputs, as well as six stereo insert jacks for separate use…
In StockAmerican Amplifier Tech AAT-UHF-3000
3000 Watt Digital UHF TV Transmitter
AAT Digital UHF Transmitters are designed using reliable modular systems that offer flexible configurations. All UHF systems incorporate a user friendly touchscreen display. Remote monitoring is provided via Ethernet, SNMP, and Remote Samples. All units can easily be paired with any of our…
Call For AvailabilityWhirlwind THS2
Talkback Headphone Box
The Whirlwind THS 2 sports announcer box has two mic control buttons, a latching Mic On/Off switch and a momentary Cough switch. The microphone output of the THS 2 boxes is a passive, straight through connection. THS boxes are ergonomically designed to put the control buttons within easy reach of…
Call For AvailabilityHosa Technology PDR369
Balanced XLR Patch Bay
The Hosa PDR369 is an affordable straight-through 12 point balanced XLR mic input patchbay. It ships with female front and male rear connectors, but these can easily be reversed by the user if desired. Shielded wiring.
Call for availabilityAphex Headpod 4
Headpod Headphone Amplifier
The Aphex HeadPod 4 offers professional monitoring for all types of headphones, and features four independent stereo power amplifiers, individual volume controls, high headroom, a wide frequency response with ultra-low distortion, very low crosstalk and a master volume to match source level. With…
Call For AvailabilityWhirlwind HBUC
Headphone Audio Control Box
This compact, passive headphone control box mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, and anywhere space is at a premium. It sports two 1/4" inputs for input / through connections, and boasts a rounded edge…
Call for availabilityGalaxy Audio JIBS
4-Way Headphone/Monitor Splitter
Galaxy's Jack-in-the-Box (model #JIBS) is a 4-way audio splitter. It splits a single monitor feed to as many as four monitors, or a single headphone feed to four headphones. Balanced 1/4" TRS inputs and outputs provide maximum isolation.
Call for availabilityCloud Microphones Cloudlifter CL-Z
Single Channel phantom powered mic activator/pre, variable impedance, high pass filter & gain pad
Maximize Your Mic Signal for Stage or Studio! Optimize any dynamic or ribbon microphone in your locker with the Cloud Microphones CL-Z mic activator! The Cloud Microphones CL-Z mic activator uses phantom power from your preamp to solve an array of common issues with dynamic and ribbon microphones…
Call For AvailabilityHenry Engineering Desk Mount Kit
Desk Mounting Kit
Desk Mounting kit for Henry Engineering products. Sports pod pictured, not included.
Call For AvailabilityArmstrong FM2500B
FM Transmitter 2.5KW -- FM2500B + FMX-30B
Armstrong Solid State FM transmitters utilize a building block approach to achieve the required transmitter output power. Multiples of either their 650 Watt, 1.3 kW or 2.5 kW self-contained Solid State Amplifier are rack mounted with an appropriately sized driver and externally combined. This model…
Call for availability